Comparative Study on the Effect of Forced Air Cooling on Electrical and Thermal Performance Efficiency of a Solar PV Module

Authors

  • Abubakar Ahmad M.Sc. Renewable Energy Student, Usmanu Danfodiyo University Sokoto (UDUS) Author

Keywords:

Renewable energy, Solar PV module, Forced air cooling, Electrical efficiency, Thermal efficiency

Abstract

High operating temperatures limit the efficiency of solar photovoltaic (PV) modules. Forced air-cooling is a simple and cost-effective method to remove excess heat and improve PV performance. This study experimentally investigates the effect of forced air cooling on both electrical and thermal performance efficiency of a standard solar PV module under Sokoto State climatic conditions. Measurements of voltage, current, solar irradiance, module temperature, and airflow were conducted over five consecutive days. Results show that forced air-cooling enhances electrical efficiency, with peak values reaching 10.52%, and significantly reduces module temperature, increasing thermal efficiency up to 37.56%. The study highlights the dual benefit of forced air cooling and provides guidance for optimizing PV system performance in hot climates.

References

Agyekum, E. B., PraveenKumar, S., Alwan, N. T., Velkin, V. I., & Shcheklein, S. E. (2021). Effect of dual surface cooling of solar photovoltaic panel on the efficiency of the module: Experimental investigation. Heliyon, 7(9), e07920. https://doi.org/10.1016/j.heliyon.2021.e07920

Assi, A., Hassan, A., Al-Shamisi, M., & Hejase, H. (2012). Removal of air blown dust from photovoltaic arrays using forced air flow of return air from air conditioning systems. In 2012 International Conference on Renewable Energies for Developing Countries (REDEC). https://doi.org/10.1109/REDEC.2012.6416699

Electrical Technology. (2020, October). Pow er formulas in DC and AC 1-phase & 3-phase circuits. https://www.electricaltechnology.org/2020/10/power-formulas-ac-dc.html

Energypedia. (n.d.). Solar cells and modules. Retrieved December 2, 2024, https://energypedia.info/wiki/Solar_Cells_and_Modules

Frontiers in Energy Research. (2022). Experimental variation of a numerical model to predict the performance of solar PV cells. Frontiers in Energy Research, 10, Article 873322. https://doi.org/10.3389/fenrg.2022.873322

Hamed, T. A., AL share, A., & El-Khalil, H. (2019). Passive cooling of building-integrated photovoltaics in desert conditions: Experiment and modeling. Energy, 170, 131-138. https://doi.org/10.1016/j.energy.2018.12.153

Ji, C., Bachmann, M., Esch, T., Feilhauer, H., Heiden, U., Heldens, W., Hueni, A., Lakes, T., Metz-Marconcini, A., Schroedter-Homscheidt, M., Weyand, S., & Zeidler, J. (2021). Solar photovoltaic module detection using laboratory and airborne imaging spectroscopy data. Remote Sensing of Environment, 266, 112692. https://doi.org/10.1016/j.rse.2021.112692

Mittag, M., & Hohm, U. (2019). Thermal modelling of photovoltaic modules in operation and production. Fraunhofer ISE. Retrieved January 6, 2025, from https://www.ise.fraunhofer.de/content/dam/ise/de/documents/publications/conference-paper/36-eupvsec-2019/Mittag_4CO24.pdf

Njomo, D. B., Barka, M. K., Khayal, M., Goron, D. C., Sorel V. M., Tiague, R. K., … & Nzadi, S. J. E. (2020). Modeling the Incident Solar Radiation of City of N’Djamena (Chad) by the Capderou Method. Journal of Energy Research and Reviews, 2020, Article 6292147. https://dio.org/10.1155/2020/6292147.

Sengupta, M., Xie, Y., Lopez, A., Habte, A., Maclaurin, G., & Shelby, J., (2018). The National Solar Radiation Data Base (NSRDB). Renewable and Sustainable Energy Reviews, 89, 51-60. https://www.nrel.gov/gis/solar-resource-maps.html

Downloads

Published

2026-06-30